Setting up a Mumble Server on the Raspberry Pi is simple. If you do not have access to the router, ask your local administrator for advice. You’ll need to forward port 22 to the IP that you just set if you wish to use SSH over the internet. You can use SSH to do everything else if you’d like your server to be headless or you can keep directly interfacing with the Pi. You’ve successfully set up a Static IP address which allows SSH Access over the local network. Make sure to note it down as you’ll need it later. Somewhere, you should see the IP Address that you just set. If you encounter any issues, try checking the network interfaces file and making sure that it was configured correctly. This will check that the Pi can reach google servers. Once rebooted, verify that you have an internet connection by typing: Unless you use a different netmask, you should keep it at the value above. You should now be staring at the Nano Editor. This has just backed up our network interfaces configuration in case something goes wrong. We’re going to use a Static IP Address as it will make port forwarding a lot easier later. We now need to find out what our local IP Address is. You can launch the GUI if you want, but most of this is going to be done in the shell anyway, so it’s up to you. Afterwards, click finish and you will be in a shell. This time, Select the SSH and set it to Enable. This will bring you back to the Config Screen. Once this has finished, the system will reboot. This option expands the filesystem to fill the entire SD Card, giving you more space to work with. This can cause you to run out of space quite quickly. By default, the Raspberry Pi’s root filesystem only takes as much space as is needed. Select that and follow the on-screen instructions. The first thing to do is to Expand_RootFS. This will bring up a screen that looks like this:įrom this screen, there are two things we need to do if you haven’t already. The Raspberry Pi’s recommended image (Raspbian Wheezy) has a built in SSH server. When SSH is enabled, you can log in remotely from a wide range of devices and access a console. It is commonly used on servers that are headless (Without a monitor). SSH (Secure Shell) is a method of accessing a server. What We’re Gonna Do:ġ) Setting Up SSH Access on the Raspberry Pi. This tutorial assumes that you have a Raspberry Pi. It can be powered by a common Micro-USB phone charger and uses very little power, making it ideal for something like this. The Raspberry Pi is a $25 computer which is the size of a credit card. For the people who are not into technology, that basically means that it allows several people to talk to each other for free without putting a huge load on the computer. Mumble is an Open Source VOIP (Voice over Internet Protocol) client with very efficient use of bandwidth and very low latency. It’s gonna be a bit of a deviation from my normal blogging style today. English: Mumble Logo Deutsch: Mumble Logo (Photo credit: Wikipedia)
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |